Specifications

3-194
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show inetd
show inetd
To display the status of TCP/IP services on a WAAS device, use the show inetd EXEC command.
show inetd
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
central-manager
Usage Guidelines The show inetd EXEC command displays the enabled or disabled status of TCP/IP services on the
WAAS device. You can ignore the TFTP service status because TFTP is not supported on WAAS.
Examples Table 3-40 describes the fields shown in the show inetd command display.
Related Commands (config) inetd
Table 3-40 Field Descriptions for the show inetd Command
Field Description
Inetd service configurations:
ftp Status of whether the FTP service is enabled or disabled.
rcp Status of whether the RCP service is enabled or disabled.
tftp Status of whether the TFTP service is enabled or disabled.