Specifications

3-182
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show disks
...
/dev/md8 RAID-1 ONE OR MORE DRIVES ABNORMAL disk04/00[GOOD]
Table 3-33 describes some typical fields in the show disks tech-support command display for a RAID-1
appliance that supports SMART. SMART attributes are vendor dependent; each disk vendor has a
different set of supported SMART attributes.
Table 3-34 describes the fields shown in the show disks tech-support command display for a RAID-5
appliance.
Table 3-33 Field Descriptions for the show disks tech-support Command (RAID-1)
Field Description
disk00—disk05 WAE 7300 series appliances show information for 6 disk drives,
and WAE 500 and 600 series appliances show information for 2
disk drives.
Device Vendor number and version number of the disk.
Serial Number Serial number for the disk.
Device type Type of device is disk.
Transport protocol Physical layer connector information, for example: Parallel SCSI
(SPI-4).
Local time is Day of the week, month, date, time hh:mm:ss, year, clock
standard. For example, Mon Mar 19 23:33:12 2007 UTC.
Device supports SMART and
is Enabled
Status of SMART support: Enabled or Disabled.
Temperature Warning Enabled Temperature warning status: Enabled or Disabled.
SMART Health Status: Health status of the disk: OK or Failed.
Table 3-34 Field Descriptions for the show disks tech-support Command (RAID-5)
Field Description
Controllers found Number of RAID controllers found.
Controller information
Controller Status Functional status of the controller.
Channel description Description of the channel transport protocols.
Controller Model Make and model of the controller.
Controller Serial Number Serial number of the ServeRAID controller.
Physical Slot Slot number.
Installed memory Amount of memory for the disk.
Copyback Status of whether copyback is enabled or disabled.
Data scrubbing Status of whether data scrubbing is enabled or disabled.
Defunct disk drive count Number of defunct disk drives.
Logical drives/Offline/Critical Number of logical drives, number of drives that are offline, and
number of critical alarms.
Controller Version Information