Specifications
3-181
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show disks
The following is sample output from the show disks tech-support command. The output shows that
partition 04 and partition 05 on disks disk00 and disk01 are GOOD, and the RAIDed partitions /dev/md4
& /dev/md5 are in NORMAL OPERATION. However, the RAIDed partition /dev/md8 has an issue with
one of the drives. Disk04 with partition 00 is GOOD, but the status shows ONE OR MORE DRIVES
ABNORMAL because there is no pair on this partition.
WAE# show disks tech-support
/dev/md4 RAID-1 NORMAL OPERATION disk00/04[GOOD]
disk01/04[GOOD]
/dev/md5 RAID-1 NORMAL OPERATION disk00/05[GOOD]
disk01/05[GOOD]
Table 3-32 Field Descriptions for the show disks details Command
Field Description
Physical disk information Lists the disks by number. WAE 7300 series appliances show
information for 6 disk drives and WAE 500 and 600 series
appliances show information for 2 disk drives.
disk00 Availability of the disk: Present, Not present or Not responding,
or Not used (*).
Disk identification number and type, for example: (h00 c00i00
100 - DAS).
Disk size in megabytes and gigabytes, for example: 140011MB
(136.7GB).
disk01 Same type of information is shown for each disk.
Mounted filesystems Table containing the following column heads:
Mount point Mount point for the file system. For example, the mount point for
SYSFS is /local/local1.
Type Type of the file system. Values include root, internal, CONTENT,
SYSFS, and PRINTSPOOL.
Device Path to the partition on the disk.
Size Total size of the file system in megabytes.
Inuse Amount of disk space being used by the file system.
Free Amount of unused disk space for the file system.
Use% Percentage of the total available disk space being used by the file
system.
Software RAID devices If present, lists the software RAID devices and provides the
following information for each:
Device name Path to the partition on the disk. The partition name “md1”
indicates that the partition is a raided partition and that the RAID
type is RAID-1.
Type Type of RAID, for example RAID-1.
Status Operational status of the RAID device. Status may contain
NORMAL OPERATION or REBUILDING.
Physical devices and status Disk number and operational status of the disk, such as [GOOD]
or [BAD].