Specifications

3-172
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show cms
Table 3-25 describes the fields shown in the show cms info command display for WAAS Central
Managers.
Status Connection status of the device to the Central Manager. This
field may contain one of three values: online, offline, or
pending.
Time of last config-sync Time when the device management service last contacted the
Central Manager for updates.
CMS services information
Service cms_ce is running Status of the WAE device management service (running or not
running). This field is specific to the WAE only.
Table 3-24 Field Descriptions for the show cms info Command for WAAS Application Engines
Field Description
Table 3-25 Field Descriptions for the show cms info Command for WAAS Central Managers
Field Description
Device registration information
Device Id Unique identifier given to the device by the Central Manager at
registration, which is used to manage the device.
Device registered as Type of device used during registration: WAAS Application
Engine or WAAS Central Manager.
Current WAAS Central Manager
role
Role of the current Central Manager: Primary or Standby.
Note The output for primary and standby Central Manager
devices is different. On a standby, the output includes
the following additional information: Current WAAS
Central Manager and Registered with WAAS Central
Manager.
Current WAAS Central Manager Address of the standby Central Manager as currently
configured in the central-manager address global
configuration command.
Registered with WAAS Central
Manager
Address of the standby Central Manager with which the device
is registered.
CMS services information
Service cms_httpd is running Status of the management service (running or not running).
This field is specific to the Central Manager only.
Service cms_cdm is running Status of the management service (running or not running).
This field is specific to the Central Manager only.