Specifications

3-163
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show cdp
Table 3-14 describes the fields shown in the show cdp entry neighbor version command display.
Table 3-15 describes the field in the show cdp holdtime command display.
Table 3-16 describes the fields shown in the show cdp interface command display.
Table 3-17 describes the fields shown in the show cdp neighbors command display.
Table 3-13 Field Descriptions for the show cdp entry protocol Command
Field Description
Protocol information
for XX
Name or identifier of the neighbor device.
IP address IP address of the neighbor device.
CLNS address Non-IP network address. The field depends on the type of neighbor.
DECnet address Non-IP network address. The field depends on the type of neighbor.
Table 3-14 Field Descriptions for the show cdp entry version Command
Field Description
Version information
for XX
Name or identifier of the neighbor device.
Software, Version Software and version running on the neighbor device.
Copyright Copyright information for the neighbor device.
Table 3-15 Field Descriptions for the show cdp holdtime Command
Field Description
XX seconds Time, in seconds, that the current device will hold the CDP advertisement
from a transmitting router before discarding it.
Table 3-16 Field Descriptions for the show cdp interface Command
Field Description
Interface_slot/port is
XX
Operation status of the CDP interface. Values are up or down.
CDP protocol is XX Protocol being used by the connectivity media.
Table 3-17 Field Descriptions for the show cdp neighbors Command
Field Description
Device ID Configured ID (name), MAC address, or serial number of the neighbor device.
Local Intrfce (Local Interface) Protocol being used by the connectivity media.
Holdtime Time, in seconds, that the current device will hold the CDP advertisement
from a transmitting router before discarding it.