Specifications

3-160
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show bypass
show bypass
To display static bypass configuration information for a WAE, use the show bypass EXEC command.
show bypass list
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
Examples Table 3-10 describes the fields shown in the show bypass list command display.
Related Commands (config) bypass
list Displays the bypass list entries. You can have a maximum of 50 entries.
Table 3-10 Field Descriptions for the show bypass list Command
Field Description
Client IP address and port of the client. For any client with this IP address, the WAE
will not process the packet, but will bypass it and send it back to the router.
Server IP address and port of the server.
Entry type Type of bypass list entry. The Entry type field contains one of the following
values: static-config, auth-traffic, server-error, or accept.
A static-config entry is a bypass list entry that is configured by the user. An
auth-traffic entry is a type of dynamic entry that the internal software adds
automatically when the server requests authentication.