Specifications

3-154
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show arp
show arp
To display the ARP table for a WAAS device, use the show arp EXEC command.
show arp
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
central-manager
Usage Guidelines Use the show arp command to display the Internet-to-Ethernet address translation tables of the Address
Resolution Protocol. Without flags, the current ARP entry for the host name is displayed.
Examples Table 3-5 describes the fields shown in the show arp command display.
Table 3-5 Field Descriptions for the show arp Command
Field Description
Protocol Type of protocol.
Address IP address of the hostname.
Flags Current ARP flag status.
Hardware Addr Hardware IP address given as six hexadecimal bytes separated by colons.
Type Type of wide-area network.
Interface Name and slot/port information for the interface.