Specifications

3-62
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
debug authentication
• For filtering on critical and error level debug messages, use the logging disk priority error global
configuration command.
• For filtering on critical, error, and trace debug level debug messages, use the logging disk priority
debug global configuration command.
• For seeing all debug log messages, which include critical, error, trace and detail messages, use the
logging disk priority detail global configuration command.
Regardless of the priority level configuration, any syslog messages at the LOG_ERROR or higher
priority will be automatically written to the debug log associated with a module.
We recommend that you use the debug and undebug commands only at the direction of Cisco Systems
technical support personnel.
Examples The following example shows how to enable user authentication debug monitoring, verify that it is
enabled, and then disable debug monitoring:
WAE# debug authentication user
WAE# show debugging
Debug authentication (user) is ON
WAE# no debug authentication user
Related Commands show debugging