Specifications

3-12 Cisco MGX 8220 Reference, Release 4.1
MGX 8220 Management through SNMP
cardGeneric
The cardGeneric section contains objects that are common to all card types. This section contains
five subsections.
1 The cardGeneric section contains objects that are common to all card types. This section contains
five sub-sections. cardInformation contains card type, card slot, serial number, hardware and
firmware revision number, and so forth.
2 cardInterface contains a list of physical interfaces and service types available on a card.
3 cardSelfTest contains a selftest enable/disable object, the interval between selftests, and the
results of the last selftest.
4 controlMsgCounter contains the current values of the control SAR counters (control frames
transmitted and received, control cells discarded, and so forth).
5 sarChannelCounter contains the current values of the channel SAR counters. These counters are
for ATM cells and are maintained on a per VC basis.
cardSpecific
This section contains objects that are specific to a particular type of card. The cardSpecific section
contains seven sub-sections.
1 bnmClockConfig contains the primary and secondary clock sources, the status and impedance of
the external T1/E1 clock input.
2 bnmAddressTranslation contains shelf, slot and channel mapping data.
3 bnmATMCounters contains the ATM counters on the BNM card. These counters contain the
current values of ATM cells transmitted, ATM cells received, and so forth.
4 ASC LMI signaling information.
5 The fifth is currently unused.
6 Service module feature information.
7 Service module rate control configuration data.
axisLines
The axisLines section consists of four subsections.
1 serialInterface contains information about the serial (maintenance and control ports) lines in the
shelf.
2 ethernetInterface contains information about the Ethernet LAN port in the shelf.
3 dsx1 contains information about configuration, alarm configuration, alarm status and counters
for the DS1 lines.
4 dsx3 contains information about configuration, alarm configuration, alarm status and counters
for the DS3 lines.
axisServices
The MGX 8220Services sections consists of the MGX 8220 service. This section contains
information about frame relay channel configurations, configurable parameters, and LMI signalling.
This section also contains similar MIB objects for ATM services.