Specifications

5-14 Cisco MGX 8220 Reference, Release 4.1
FRASM Connections
5 Use the add channel (addchan)command to specify the frame relay portion of the connection.
This consists of specifying the DLCI and committed rate for the channel.
addchan <chan_num> <port_num> <dlci_num> <cir>
where:
6 Use the add BSTUN route command (addbstunroute) to establish a connection between the
frame relay channel number and the 3270 control unit.
addbstunroute <port_num><cuaddress><chan_num><lsap> :
<chan_num> channel number is in the range 16–1015
<port_num> port number is in the range 1–192
<dlci_num> DLCI is in the range 0–1023
<cir> committed information rate: 0–1536000 bps for T1; 0–2048000 bps
for E1 (FRASM does not support E1)
<port_num> port number of the BSTUN connection to be routed in the range
1–192
<cuaddress> address of the control unit in the range 0x01–0xFF
<chan_num> channel number of the BSTUN connection to be routed in the range
16–1015
<lsap> number in the range 0x01–0xFF