Specifications

5-6 Cisco MGX 8220 Reference, Release 4.1
AUSM Connections
FRSM Service Interworking Connections
FRSM service interworking connections are made in the same manner as the network interworking
connections except that chan_type in the MGX 8220 addchan command is specified as service
interworking (transparent or translation) and the connection end that is remote from the MGX 8220
is an ATM UNI.
FUNI and Frame Forwarding
These services are setup the same as frame relay except the for port_type in the addchan command
which is set as 2 for FUNI or 3 for frame forwarding.
AUSM Connections
AUSM connections can be setup either through StrataView Plus or via the CLI.
Via StrataView Plus
Setting up an AUSM connection is normally performed from StrataView Plus using the Connection
Manager graphical user interface. An example of the StrataView Plus screen used for making an
MGX 8220 ATM to ATM connection is shown in Figure5-3. For full details of how to set up a
connection, refer to the Cisco StrataView Plus Operations Guide.
Figure5-3 ATM -ATM Connection Screen