Specifications

5-2 Cisco MGX 8220 Reference, Release 4.1
Setting up a Frame Relay Connection
Figure5-1 StrataView Plus Connection Manager Screen for the MGX 8220 Shelf
Via the Command Line Interface
The Command Line Interface (CLI) provides the capability to set up a variety of frame relay
connections.
FRSM Network Interworking Connections
The following sections describe how to establish an end-to-end frame relay connection with network
interworking and MGX 8220 FRSM end points.
Figure5-2 shows two BPX nodes in a BPX network in which each of these two nodes is connected
to an MGX 8220 shelf via an BNI card. User frame relay equipment, located at “A”, is attached to
one of the MGX 8220 shelves via a port on the shelf’s FRSM card. User frame relay equipment,