User's Manual
Table Of Contents
- Product overview
- Setting Up: Basics
- Setting Up: Advanced
- How to open the browser-based utility
- How to manually set up your router
- How to set up the DHCP server on your router
- How to find your network on the Internet
- How to clone a MAC address
- How to connect to your corporate office using a VPN
- How to optimize your router for gaming and voice
- How to remotely change your router settings
- How to enable Voice over IP on your network
- How to configure UPnP
- How to use a router as an access point
- How to put your new router behind an existing router
- How to expose a device to the Internet
- Improving Security
- Port Forwarding and Port Triggering
- Maintaining and Monitoring
- Specifications
41
Maintaining and Monitoring
Linksys E800
4.
To view the logs, click View Log. The Log window opens.
5.
Select the log you want to see from the Type drop-down list.
• Incoming Log—The source IP addresses and destination port
numbers for incoming Internet traffic
• Outgoing Log—Local IP addresses, destination URLs/IP addresses,
and service/port numbers for outgoing Internet traffic
• Security Log—Logins for the browser-based utility
• DHCP Client Log—Local DHCP server status information
6.
To save the log, click Save the Log, then click OK or Save.
CAUTION
All logs that are not saved will be lost whenever the router restarts.