User's Manual
Table Of Contents
- Product overview
- Setting Up: Basics
- Setting Up: Advanced
- How to open the browser-based utility
- How to manually set up your router
- How to set up the DHCP server on your router
- How to find your network on the Internet
- How to clone a MAC address
- How to connect to your corporate office using a VPN
- How to optimize your router for gaming and voice
- How to remotely change your router settings
- How to enable Voice over IP on your network
- How to configure UPnP
- How to use a router as an access point
- How to put your new router behind an existing router
- How to expose a device to the Internet
- Improving Security
- Port Forwarding and Port Triggering
- Maintaining and Monitoring
- Specifications
10
Setting Up: Basics
Linksys E800
How to change your router’s name and
password
You can change the name and password of your router, but if you do so, all
wireless devices connected to your router will lose their Internet connection
until you reconnect them using the new router name and password.
CAUTION
If you change your router’s name and password using the browser-
based utility, you may not be able to manage your router using
Cisco Connect. We recommend using the procedure below to
change your router’s login information.
To change your router’s name and password:
1.
Run Cisco Connect, then click Change under Router settings.
2.
Under Personalize, click Change. A Changing router name and password
warning appears
3.
Click Yes if you want to continue.
4.
Enter the new router name and password, then click Change.
TIP
After you make changes, update your Easy Setup Key to make it
easier to reconnect all of the other computers on the network.