Specifications

D14330.06 ADMINISTRATOR GUIDE TANDBERG E20—July 2009
31
What’s in this Guide? Introduction Getting Started Using E20 The Settings Advanced settings
Advanced Settings
System location
Enter the name of the Network Services SNMP System Location.
Telnet
Telnet is a network protocol used on the Internet or local area network
(LAN) connections.
On: The Telnet protocol is enabled.
Off: The Telnet protocol is disabled. This is the default factory
setting.
Phonebook
ID: Enter a name for the external phonebook. Addresses the
specific phonebook.
Type: Can be TMS (TANDBERG Management System) or VCS
(Video Communication Server)
URL: Enter the address (URL) to the external phonebook server.
Addresses the specific phonebook server.
Provisioning
Provides the possibility of managing the E20 by using an external
manager/management system.
External Manager
Address: Enter the name for the provisioning server.
Domain: Enter the domain of the provisioning server
Path: Enter the path within the external manager to access the
provisioning information (if http-based provisioning.)
External manager Mode
Off: The system will not try to register to any management system.
TMS: If set to TMS the system will try to register with a TMS
server as described in the address and path settings. TMS is
short for TANDBERG Management System. Please contact your
TANDBERG representative for more information.
VCS: If set to VCS the system will try to register with a VCS as
described in described in the address and path settings. VCS
is short for Video Communication Server. Please contact your
TANDBERG representative for more information.
SIP
Profile 1
The SIP URI or number is used to address the system. This is the URI
that is registered and used by the SIP services to route inbound calls
to the system. A Uniform Resource Identifier (URI) is a compact string
of characters used to identify or name a resource.
Authentication
Login name: This is the user name part of the credentials used to
authenticate towards the SIP proxy.
Password: This is the password part of the credentials used to
authenticate towards the SIP proxy.
Default transport
Select the transport protocol to be used over the LAN.
UDP: The system will always use UDP as the default transport
method.
TCP: The system will always use TCP as the default transport
method.
TLS: The system will always use TLS as the default transport