Specifications

D14330.06 ADMINISTRATOR GUIDE TANDBERG E20—July 2009
27
What’s in this Guide? Introduction Getting Started Using E20 The Settings Advanced settings
Advanced Settings
Description of the Advanced Settings
On the following pages you will find a list of the settings available to
administrators—known as the Advanced settings.
We recommend you visit the TANDBERG web site regularly for updated
versions of the manual. Go to: http://www.tandberg.com/docs.
To access the Advanced settings, do as follows:
1. Press the
key to produce the menu. Use the key to navigate
down to Settings and press either
or use the key to navigate to
the right.
2. Navigate down to Advanced.
3. To navigate further down in the menu hierarchy repeat 1. above.
4. To go one or more steps back in the hierarchy, use the
key to
navigate to the left, the required number of times.
5. To collapse all menus, press the
key.
6. To put a change into effect, press
as soon as the required setting
has been selected or changed.
IP settings
This menu lets you
• Set IP assignment to static or DHCP
When set to static, you should also define:
• IP address
• Subnet mask
• Gateway