Specifications

D14330.06 ADMINISTRATOR GUIDE TANDBERG E20—July 2009
25
What’s in this Guide? Introduction Getting Started Using E20 The Settings Advanced settings
The Settings
Ring volume lets you set the volume of the incoming call signal. You will
hear the level as you adjust.
Key tones let you determine whether you should hear a sound every time
you press a key or not. Set to On to activate.
Provisioning
Provisioning is used to update the provisioning information that the E20
is set up with. For future use.
System information
This is an information panel only, providing information on
• System name
• Uptime
• Network IP address
• SIP address
• SIP proxy address
• SIP status
• E20 software version
• Hardware Module serial number
• MAC address
When in a call the following is also provided:
• Remote URI
• Call rate
• Protocol
• Video protocol
• Video resolution
• Video channel rate
• Video Packet loss (in numbers and in %)
• Video Jitter
• Audio protocol
• Audio Channel rate
• Audio Packet loss (in numbers and in %)
• Audio jitter
• Encryption type
• Encryption status
Advanced
The Advanced settings are described in detail in the next chapter.