Specifications

D14330.06 ADMINISTRATOR GUIDE TANDBERG E20—July 2009
24
What’s in this Guide? Introduction Getting Started Using E20 The Settings Advanced settings
The Settings
Description of the Settings available
On the following pages you will find a list of the settings available.
We recommend you visit the TANDBERG web site regularly for updated
versions of the manual. Go to: http://www.tandberg.com/docs.
To access the Settings, do as follows:
1. Press the
key to produce the menu. Use the key to navigate
down to Settings and press either
or use the key to navigate to
the right.
2. The menu contains the following topics:
• Call settings
• Language
• Date and time
• Sounds and alerts
• Provisioning
• System information
• Advanced
3. Some of these menus have their own submenus. To navigate further
down in the menu hierarchy repeat 1. above.
4. To go one or more steps back in the hierarchy, use the
key to
navigate to the left, the required number of times.
5. To collapse all menus, press the
key.
6. To put a change into effect, press
as soon as the required setting
has been selected or changed.
The Settings
Call settings
Call forward lets you forward all calls to a defined receiver. Just key in
the identity and activate the feature.
Auto answer can be set to Off or On. When set to Off you must
respond to an incoming call to accept it, either by lifting the handset or by
pressing the
key. When set to On, the call is automatically accepted.
Default bitrate in calls can be set to 1152, 768, 512, 384, 256 or 128 kbps.
Maximum upstream bitrate can be set to 1152, 768, 512, 384, 256 or
128 kbps.
Maximum downstream bitrate can be set to 1152, 768, 512, 384,
256 or 128 kbps.
The reason for allowing different upstream and downstream bitrate is
to meet the need to specify different settings in asymmetric internet
connections—typically when operating the E20 from home.
Language
Language is used to reset the menu language after the initial startup.
Whenever the user changes the language, the E20 needs to reconfigure
the menu system. This will take approx 10 secs.
Date and time
Date and time can be set to either manual or automatic.
If set to automatic the menu allows you to set the date, month, year and
the time of day in hours and minutes. Date format and time format settings
are also available.
Sounds and alerts
Ring tones allow you to select between the ring tones available. Use the
key to navigate up and down as usual. You will hear the different ring
tones as you move up and down.