Specifications

D14330.06 ADMINISTRATOR GUIDE TANDBERG E20—July 2009
22
What’s in this Guide? Introduction Getting Started Using E20 The Settings Advanced settings
Using E20
Blind transfer
When you are in a call, you may transfer the other party to someone else,
to let them communicate without your participance.
Do as follows:
1. While in a call, press the softkey
tRanSfeR.
This will bring up the following menu:
2. You may now key in the “number” to which the other party shall be
transferred.
Alternatively you may navigate down to the Phone book and search
within this in the usual way, or you may enter Recent calls and select
an entry there.
3. After the “number” has been located, proceed as if you were placing
a call from the phone book in the usual way. The only difference is that
the other party will be connected to the one you just called and you will
be disconnected.
Consultative transfer
You may also combine the two above options. Instead of just transferring
the other party to someone else without consulting the one to receive the
call, you may call this person first and then do the transfer.
Do as follows:
1. While in a call, press the softkey
HoLd.
2. Press the softkey
new caLL.
3. Place a new call in the usual way.
4. When you are ready to connect the two together and disconnect
yourself, just press
tRanSfeR.