Specifications

D14330.06 ADMINISTRATOR GUIDE TANDBERG E20—July 2009
19
What’s in this Guide? Introduction Getting Started Using E20 The Settings Advanced settings
Using E20
Calling someone by dialing their number
Dial the number directly and press . You can lift off the handset both
before and after dialing.
Alternatively, just press
to show the Call menu, if needed. Position the
cursor at Call and press to show the Call submenu:
Key in the “number” to call and press twice to start calling.
While doing this you may need to switch to alphanumeric setting by means
of the abc/123/ABC softkey. Activate
SpeciaL cHaRacteRS, if needed.
Answering an incoming call
• Lift the handset to answer the incoming call. Put the handset back in its
cradle to terminate the call.
• Alternatively, press
to answer an incoming call. The call will then use
the built-in loudspeaker or your headset (if attached and selected).
• To reject an incoming call press
.
Switching between handset,
loudspeaker and headset
• To switch from handset to loudspeaker without terminating an ongoing
call, press the button before putting the handset back in its cradle.
• To switch from loudspeaker to handset, just lift the handset.
• To switch between loudspeaker and headset, press the corresponding
button (
and ).