User guide

31
Chapter 4: Establish CaseViewNet Connection
© 2012 Stenograph, L.L.C.
Make the following entries:
Auto Reconnect
Check this box for CaseViewNet to automatically attempt to re-establish a connection to the Case
CATalyst server if the connection is lost. This is the default. The number of attempts is determined by
the entry in the Auto Reconnect Max field. Uncheck this box to always establish connection
manually.
Auto Reconnect Max
When Auto Reconnect is active, CaseViewNet attempts to connect to the Case CATalyst server for
the specified number of attempts. Depending on your CaseViewNet version, the default is 5 or 15. If
no connection establishes after the designated number of attempts, CaseViewNet prompts you to
continue connection attempts or to stop.
7. Click Next. The Connecting to a server screen displays.
All available Case CATalyst servers display. Select the Windows computer name of your Case
CATalyst computer which shows as a server. In most situations, your Case CATalyst computer will
be the only server listed. Although the option to specify the server manually is available, Stenograph
recommends you and your client do not select this option.