User guide

29
Chapter 4: Establish CaseViewNet Connection
© 2012 Stenograph, L.L.C.
CaseViewNet Client Connection
Your Case CATalyst computer must first be signed onto your network and a realtime session started
to allow the CaseViewNet client to establish a CaseViewNet connection to your Case CATalyst server.
1. Provide the CaseViewNet program to your client. The CaseViewNet program can be easily
downloaded from the Stenograph website and run on the client’s hard drive, a flash drive, (i.e. thumb
or jump drive) or other external device. See CaseViewNet Installation on page 41.
2. Provide the client with your wireless network name and passphrase, if applicable; and have them
connect to your WiFi wireless network. Your wireless network name and passphrase are the same
name and passphrase created during router configuration.
To connect to your wireless network for the first time, right click the appropriate wireless icon in the
SysTray and select View Available Wireless Networks (Windows XP) or Connect to a network
(Windows Vista) from the menu. Select the network, enter the passphrase, if necessary, and click
Connect. See Connect to Your Wireless Network on page 15 for additional information about
connecting to your network.
In a situation where a client does not have built in WiFi capability, you can:
• connect an Ethernet cable between one of the four available Ethernet ports on the Linksys E1200
router and the client’s computer network port or NIC card. Connect up to four Ethernet cables to
four computers and continue with the setup instruction.
• connect a serial cable between the Case CATalyst computer and the CaseViewNet client
computer. Certain CaseViewNet features are not available. See the CaseViewNet Help for
additional information about serial connection, including setup.
3. Start CaseViewNet.
4. In CaseViewNet, click the Connect icon. The Connection Wizard welcome screen displays.