User guide

15
© 2012 Stenograph, L.L.C.
Chapter 3, Connect to Your Wireless Network, provides detailed information on connecting your
Case CATalyst or CaseViewNet client computer to your wireless network for the first time or when
Windows does not automatically connect to your network. You must first complete the router
configuration on your Case CATalyst system before you are able to establish a wireless network
connection. See WiFi Wireless Router Configuration on page 7.
Establish WiFi Network Connection
Connect to your wireless WiFi network. Complete the instructions outlined for your computer’s
particular operating system. This is the network identified during router configuration. After your first
connection, Windows automatically connects to your wireless WiFi network if it was the last
connected network, it is set as default or it is the only available network in range.
Once you establish connection to your wireless WiFi network, connect to Case CATalyst and
establish CaseViewNet connection for your clients. See CaseViewNet Client Connection on page 29.
Windows 7
1. Verify the router is On. The router is on when the I/O indicator on the back displays a steady
green.
2. Turn on your Case CATalyst computer and wait until it is fully booted.
3. Verify the wireless capability on your computer is enabled.
4. Click the Wireless icon in the SysTray in the bottom right corner of your computer screen.
Chapter 3
Connect to Your Wireless Network