Installation guide

ManualsBrandsCisco ManualsComputer equipmentDS-X9224-96K9= - Switching Module - Switch

Table Of Contents

Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(8c)

Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(8c)

OL-27554-07

Related Documentation

–

A Registered State Change Notification (RSCN) is not sent to zoned members.

–

The device-mapping entry port world wide name (pWWN) associated to a device alias is not

displayed in the Dynamic Port VSAN Membership (DPVM) database.

–

The show running-configuration ivr command does not display the changes when a device

alias member in an Inter-VSAN routing zone (IVR zone) is renamed.

–

The port world wide name (pWWN) associated with the device alias is found dissociated in the

port security database.

–

A device alias member is not found in the port security database.

Condition: This situation occurs when all or one of the conditions is met:

–

A user attempts to perform a device-alias operation in batch, such as:

• Renaming an offline device alias to an existing online device alias or vice versa.

• Multiple commands are entered using the same device-alias name before a commit.

–

A device alias was renamed.

–

A device alias was deleted and an existing device alias is renamed to the deleted device alias in

the same commit.

–

A device alias, which is not configured, resides in the DPVM database and an online device is

renamed to the former.

–

The IVR distribute option is enabled and the device alias is in enhanced mode, and the changes

in a device alias is not updated to the IVR running configuration.

Workaround: Add the offline member to the device alias database, revert to the previous name if

you have renamed a device alias, and flap the ports that are connected to the affected zone member.

• CSCuh57761

Symptom: Multiple port security members that are mapped to a switch WWN (sWWN) logging

point are not fully distributed to the peer switches. The following error appears after an Cisco

In-Service Software Downgrade (ISSD), followed by entering the port-security commit command:

Internal CLI error: Timer expired

Condition: This situation occurs after an ISSD from Cisco MDS NX-OS Release 5.2(8b) to 5.2.(1).

After creating and committing port-security entries that map multiple port security members to the

same sWWN, all entries are not distributed to the peer switches.

Workaround: None.

• CSCue31727

Symptom: A user with the priv-14 role does not inherit rules from the priv-0 through priv-13 roles.

Condition: This situation occurs during a normal operation.

Workaround: Create users with roles from priv-0 to priv-13 and log in, or log in to the switch using

AAA authentication where users with certain user levels are identified.