Installation guide
Table Of Contents
- Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(8c)
- Contents
- Introduction
- Components Supported
- MDS 9000 Chassis and Module Support
- Software Download Process
- Determining the Software Version
- Determining Software Version Compatibility
- Downloading Software
- Selecting the Correct Software Image for an MDS 9100 Series Switch
- Selecting the Correct Software Image for an MDS 9200 Series Switch
- Selecting the Correct Software Image for an MDS 9500 Series Switch
- NPE Software Images
- Upgrading Your Cisco MDS NX-OS Software Image
- Downgrading Your Cisco MDS SAN-OS Software Image
- New Features in Cisco MDS NX-OS Release 5.2
- New Features in Cisco MDS NX-OS Release 5.2(8c)
- Cisco MDS NX-OS Release 5.2(8c) is a maintenance release that includes bug fixes. It does not include new features.
- New Features in Cisco MDS NX-OS Release 5.2(8b)
- New Features in Cisco MDS NX-OS Release 5.2(8a)
- New Features in Cisco MDS NX-OS Release 5.2(8)
- New Features in Cisco MDS NX-OS Release 5.2(6b)
- New Features in Cisco MDS NX-OS Release 5.2(6a)
- New Features in Cisco MDS NX-OS Release 5.2(6)
- New Features in Cisco MDS NX-OS Release 5.2(2d)
- New Features in Cisco MDS NX-OS Release 5.2(2a)
- New Features in Cisco MDS NX-OS Release 5.2(2)
- New Features in Cisco MDS NX-OS Release 5.2(1)
- New Hardware in Cisco MDS NX-OS Release 5.2(1)
- Licensed Cisco NX-OS Software Packages
- Deprecated Features
- Limitations and Restrictions
- SME Quorum
- OUI Mismatch for SME Tape Targets
- FCIP Performance Drop
- FCoE Module
- IPv6
- User Roles
- Schedule Job Configurations
- Maximum Number of Zones Supported in Interop Mode 4
- InterVSAN Routing
- Java Web Start
- VRRP Availability
- Using a RSA Version 1 Key for SSH Following an Upgrade
- CFS Cannot Distribute All Call Home Information
- Availability of F Port Trunking and F Port Channels
- Reserved VSAN Range and Isolated VSAN Range Guidelines
- Applying Zone Configurations to VSAN 1
- Running Storage Applications on the MSM-18/4
- RSPAN Traffic Not Supported on CTS Ports on 8-Gbps Switching Modules
- I/O Accelerator Feature Limitations
- Support for FCIP Compression Modes
- Saving Copies of the Running Kickstart and System Images
- Configuring Buffer Credits on a Generation 2 or Generation 3 Module
- Features Not Supported on the Cisco MDS 9148 Switch
- PPRC Not Supported with FCIP Write Acceleration
- Configuring a Persistent FCID in an IVR Configuration with Brocade Switches
- Caveats
- Related Documentation
- Obtaining Documentation and Submitting a Service Request

22
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(8c)
OL-27554-07
Downgrading Your Cisco MDS SAN-OS Software Image
NX-OS Release 5.2(x) and Release 5.0(x) Software Downgrade and Upgrade
Matrix for Cisco MDS 9509 and 9506 Switches
See the compatibility information in Table 14 to determine if a downgrade to or upgrade from Release
5.0(x) software is disruptive or nondisruptive on a Cisco MDS 9509 or 9506 switch.
Use Table 15 to determine the nondisruptive downgrade path from Cisco NX-OS Release 5.2(8c). Find
the NX-OS or SAN-OS image that you want to downgrade to in the To SAN-OS Release column of the
table and follow the steps in the order specified to perform the downgrade.
Note The software downgrade information in Table 15 applies only to Fibre Channel switching traffic.
Downgrading system software disrupts IP and intelligent services traffic.
Table 14 NX-OS Release 5.2(x) and Release 5.0(x) Downgrade and Upgrade Matrix
Downgrade Path on a Cisco MDS 9509 or 9506 Switch
Current Release Desired Release Expected Behavior Observed Behavior
5.2(8c) 5.2(5b), 5.2(6a), 5.2(6),
5.2(2d), 5.2(2a), or
5.2(1)
Nondisruptive Nondisruptive
5.2(2d) 5.2(2a) or 5.2(1) Nondisruptive Nondisruptive
5.2(x) 5.0(7) or 5.0(8) Disruptive Disruptive
5.0(7) or 5.0(8) 5.0(1a), 5.0(1b), or
5.0(4)
Disruptive Nondisruptive
The user is expected to
explicitly reload the
switch using the reload
command.
5.0(7) or 5.0(8) 4.2(x) or 4.1(x) Disruptive Disruptive
5.0(4) 5.0(1a) Nondisruptive Nondisruptive
5.0(1a), 5.0(1b), or
5.0(4)
4.2(x) or 4.1(x) Nondisruptive Nondisruptive
Upgrade Path on a Cisco MDS 9509 or 9506 Switch
Current Release Desired Release Expected Behavior Observed Behavior
5.2(1), 5.2(2a), 5.2(2d),
5.2(6), 5.2(6a), 5.2(6b),
5.2(8), 5.2(8a), 5.2(8a)
5.2(8c) Nondisruptive Nondisruptive
5.2(1) or 5.2(2a) 5.2(2d) Nondisruptive Nondisruptive
5.0(7) or 5.0(8) 5.2(x) Nondisruptive
Support for Generation
4 modules is available.
Nondisruptive
Support for Generation
4 modules is available.
5.0(1a), 5.0(1b), or
5.0(4)
5.2(x) Nondisruptive
Support for Generation
4 modules is not
available.
Nondisruptive
Support for Generation
4 modules is not
available.