Installation guide
Table Of Contents
- Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(8c)
- Contents
- Introduction
- Components Supported
- MDS 9000 Chassis and Module Support
- Software Download Process
- Determining the Software Version
- Determining Software Version Compatibility
- Downloading Software
- Selecting the Correct Software Image for an MDS 9100 Series Switch
- Selecting the Correct Software Image for an MDS 9200 Series Switch
- Selecting the Correct Software Image for an MDS 9500 Series Switch
- NPE Software Images
- Upgrading Your Cisco MDS NX-OS Software Image
- Downgrading Your Cisco MDS SAN-OS Software Image
- New Features in Cisco MDS NX-OS Release 5.2
- New Features in Cisco MDS NX-OS Release 5.2(8c)
- Cisco MDS NX-OS Release 5.2(8c) is a maintenance release that includes bug fixes. It does not include new features.
- New Features in Cisco MDS NX-OS Release 5.2(8b)
- New Features in Cisco MDS NX-OS Release 5.2(8a)
- New Features in Cisco MDS NX-OS Release 5.2(8)
- New Features in Cisco MDS NX-OS Release 5.2(6b)
- New Features in Cisco MDS NX-OS Release 5.2(6a)
- New Features in Cisco MDS NX-OS Release 5.2(6)
- New Features in Cisco MDS NX-OS Release 5.2(2d)
- New Features in Cisco MDS NX-OS Release 5.2(2a)
- New Features in Cisco MDS NX-OS Release 5.2(2)
- New Features in Cisco MDS NX-OS Release 5.2(1)
- New Hardware in Cisco MDS NX-OS Release 5.2(1)
- Licensed Cisco NX-OS Software Packages
- Deprecated Features
- Limitations and Restrictions
- SME Quorum
- OUI Mismatch for SME Tape Targets
- FCIP Performance Drop
- FCoE Module
- IPv6
- User Roles
- Schedule Job Configurations
- Maximum Number of Zones Supported in Interop Mode 4
- InterVSAN Routing
- Java Web Start
- VRRP Availability
- Using a RSA Version 1 Key for SSH Following an Upgrade
- CFS Cannot Distribute All Call Home Information
- Availability of F Port Trunking and F Port Channels
- Reserved VSAN Range and Isolated VSAN Range Guidelines
- Applying Zone Configurations to VSAN 1
- Running Storage Applications on the MSM-18/4
- RSPAN Traffic Not Supported on CTS Ports on 8-Gbps Switching Modules
- I/O Accelerator Feature Limitations
- Support for FCIP Compression Modes
- Saving Copies of the Running Kickstart and System Images
- Configuring Buffer Credits on a Generation 2 or Generation 3 Module
- Features Not Supported on the Cisco MDS 9148 Switch
- PPRC Not Supported with FCIP Write Acceleration
- Configuring a Persistent FCID in an IVR Configuration with Brocade Switches
- Caveats
- Related Documentation
- Obtaining Documentation and Submitting a Service Request
13
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(8c)
OL-27554-07
Software Download Process
Downloading Software
The Cisco MDS NX-OS software is designed for mission-critical high availability environments. To
realize the benefits from nondisruptive upgrades on the Cisco MDS 9500 Directors, we highly
recommend that you install dual supervisor modules.
To download the latest Cisco MDS NX-OS software, access the Software Center at this URL:
http://www.cisco.com/cisco/software/navigator.html?a=a&i=rpm
See the following sections in this release note for details on how you can nondisruptively upgrade your
Cisco MDS 9000 switch. Issuing the install all command from the CLI, or using Cisco DCNM for SAN
to perform the downgrade, enables the compatibility check. The check indicates if the upgrade can
happen nondisruptively or disruptively depending on the current configuration of your switch and the
reason.
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes non-disruptive rolling
2 yes disruptive rolling Hitless upgrade is not supported
3 yes disruptive rolling Hitless upgrade is not supported
4 yes non-disruptive rolling
5 yes non-disruptive reset
6 yes non-disruptive reset
At a minimum, you need to disable the default device alias distribution feature using the no device-alias
distribute command in global configuration mode. The show incompatibility system bootflash:system
image filename command determines which additional features need to be disabled.
Note If you would like to request a copy of the source code under the terms of either GPL or LGPL, send an
e-mail to mds-software-disclosure@cisco.com.
Table 7 Software Release Compatibility
Cisco NX-OS Software
Minimum NX-OS or SAN-OS
Release
Tested NX-OS and SAN-OS
Releases
NX-OS Release 5.2(8c) NX-OS Release 5.0(1a) or later NX-OS Release 5.0(1a) and later
NX-OS Release 4.2(3) or later NX-OS Release 4.2(3) and later
SAN-OS Release 3.3(5) or later SAN-OS Release 3.3(5) and later