Datasheet

Data Sheet

Environmental Conditions and Power Requirements

Table 26 presents the optical parameters, and Table 27 presents the temperature ranges.

Table 26. Optical Parameters

X2 Average Transmit Power (dBm) Average Receive Power (dBm) Fiber Loss Budget

Max Min Max Min

DS-X2-E10G-SR –1.2 –7.3 –1.0 –9.9 2.6 (50.0 microns [OM3])

Table 27. Operating and Storage Temperature Ranges

X2 Operating Storage

Max Min Max Min

DS-X2-E10G-SR 40°C 0°C 85°C –40°C

Regulatory and Standards Compliance

●

Compliant with IEEE 802.3 10GBASE-SR

●

Laser Class I 21CFR1040

Ordering Information

Table 28 provides ordering information.

Table 28. Cisco 10-Gbps Ethernet X2 Transceiver Ordering Information

Part Number Description

DS-X2-E10G-SR= 10-Gbps Ethernet-Short-reach, X2, SC, Spare

Cisco Coarse Wavelength-Division Multiplexing Extended Distance SFP Solution

The Cisco MDS 9000 family offers cost-effective multiprotocol extended distance connectivity that optimizes the use

of a customer's existing optical infrastructure through the Cisco Coarse Wavelength-Division Multiplexing (CWDM)

SFP solution (Figure 9). The Cisco CWDM SFP solution has two main components: a set of eight wavelength-

specific SFPs and a set of CWDM optical add-drop modules (OADMs). A Cisco CWDM chassis enables rack-

mounting of up to two Cisco CWDM OADMs. The Cisco CWDM OADMs are passive and require no power or

configuration.

Figure 9. Cisco CWDM Extended Distance SFP Solution

The Cisco CWDM SFP solution enables the transport of up to eight channels over one pair of single-mode fiber

strands, enabling enterprises to increase the bandwidth of an existing optical infrastructure without adding new fiber

strands. The solution can be used in parallel with other Cisco SFP devices on the same platform.