Datasheet
Table Of Contents
- Cisco MDS 9000 Family Pluggable Transceivers
- Product Overview
- Cisco 2-Gbps Fibre Channel SFPs
- Cisco 4-Gbps Fibre Channel SFPs
- Cisco 8-Gbps Fibre Channel SFP+
- Cisco Tri-Rate Multiprotocol SFPs
- Cisco Copper Gigabit Ethernet SFPs
- Cisco 10-Gbps Fibre Channel X2 Transceivers
- Cisco 10-Gbps Ethernet X2 Transceivers
- Cisco Coarse Wavelength-Division Multiplexing Extended Distance SFP Solution
- Cisco 1/2-Gbps CWDM SFPs
- Cisco 4-Gbps CWDM SFPs
- Cisco CWDM OADMs
- Cisco Dense Wavelength-Division Multiplexing Extended Distance Solution
- Cisco 10-Gbps Ethernet DWDM X2 Transceiver
- For More Information
Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 9 of 22
Table 14 summarizes the cabling specifications.
Table 14. Cisco Tri-Rate Multiprotocol SFP Cabling Specifications
SFP Wavelength
(nanometers)
Fiber Type Core Size (microns) Baud Rate (GBd) Cable Distance
62.5 1.0625 300 m (984 ft)
62.5 2.125 150 m (492 ft)
50.0 (OM2) 1.0625 500 m (1640 ft)
DS-SFP-FCGE-SW 850 MMF
50.0 (OM2) 2.125 300 m (984 ft)
9.0 1.0625 10 km (6.2 mi) DS-SFP-FCGE-LW 1310 SMF
9.0 2.125 10 km (6.2 mi)
Note: The minimum cable distance for all SFPs listed (MMF and SMF) is 6.5 feet (2 meters).
Dimensions
●
Dimensions (H x W x D): 8.5 x 13.75 x 55.2 mm
Environmental Conditions and Power Requirements
Table 15 presents the optical parameters, and Table 16 presents the temperature ranges.
Table 15. Optical Parameters
SFP Average Transmit Power (dBm) Average Receive Power (dBm) Fiber Loss Budget (dBm)
Max Min Max Min
DS-SFP-FCGE-SW –1.2 –10.0 (FC) and –
9.5 (GE)
0 –17 (GE)
●
2.1 (FC: 62.5 microns) and 2.62
(FC: 50.0 microns [OM2])
●
2.38 (GE: 62.5 microns) and
3.37 (GE: 50.0 microns [OM2])
DS-SFP-FCGE-LW –3 –11.0 –3 –19 (GE)
●
7.8 (FC)
●
4.57 (GE)
Note: The fiber loss budget is derived from taking the difference between the minimum average transmit power
and the minimum average receive power and subtracting the link penalties. The specified fiber loss budget should
be used in calculating the maximum link distance.
Table 16. Operating and Storage Temperature Ranges
SFP Operating Storage
Max Min Max Min
DS-SFP-FCGE-SW 40°C 0°C 85°C –40°C
DS-SFP-FCGE-LW 40°C 0°C 85°C –40°C
Regulatory and Standards Compliance
●
Compliant with Fibre Channel FC-PI 200-SM-LC-L, FC-PI 200-M5-SN-I, and FC-PI 200-M6-SN-I 2.125 GBd;
and IEEE 802.3 Gigabit Ethernet (1.25 GBd) 1000BASE-SX specifications
●
Compliant with the Fibre Channel FC-PI 100-SM-LC-L, FC-PI 100-M5-SN-I, and FC-PI 100-M6-SN-I; and FC-
PH2 100-SM-LC-L, FC-PH2 100-M5-SN-I, and FC-PH2 100-M6-SN-I 1.0625 GBd specifications
●
Laser Class I 21CFR1040