Datasheet

Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 22
Switching Module and
Fabric Switch
DS-
CWDM4Gx
xxx=
A
DS-X2-
FC10G-xx
(non CX4)
B
DS-X2-
FC10G-
CX4=
C
DS-X2-
E10G-
SR=
A
DWDM-X2-
xx.xx=
E
DS-SFP-
FC8G-SW
DS-SFP-FC8G-LW
DS-X9016
DS-X9032
DS-X9032-SSM
DS-X9112 Yes
2
DS-X9124 Yes
2
DS-X9148 Yes
2
DS-X9302-14K9
DS-X9304-18K9 Yes
2
DS-X9304-SMIP
DS-X9308-SMIP
DS-X9704 Yes
2
Yes
2
Yes
2
DS-C9216A-K9
DS-C9216i-K9
DS-C9222i-K9 Yes
2
DS-C9120-K9
DS-C9124-K9 Yes
2, 4
DS-C9134-K9 Yes
4
Yes
2, 5
Yes
2
Yes
2, F
Yes
2, F
DS-C9140-K9
DS-C9020-20K9
DS-X9248-48K9 Yes
2
DS-X9224-96K9 Yes
2
DS-X9248-96K9 Yes
2
A: Supported on switches running Cisco MDS 9000 SAN-OS Software Release 3.1(3) or later.
B: DS-X2-FC10G-ER supported on switches running Cisco MDS 9000 SAN-OS Software Release 3.1(3) or later.
C: Supported on switches running Cisco MDS 9000 SAN-OS Software Release 3.2(1) or later.
D: Supported on switches running Cisco MDS 9000 SAN-OS Software Release 3.3(1) or later.
E: Supported on switches running Cisco MDS 9000 NX-OS Software Release 4.1(1) or later.
F: Supported on switches running Cisco MDS 9000 NX-OS Software Release 4.2(1) or later.
1: Supported on Ethernet ports only.
2: Digital diagnostic monitoring supported.
3: Limited to 60 km.
4: Limited to 30 km.
5: DS-X2-FC10G-ER not supported.
6: Supported on both Fibre Channel and Ethernet ports.
Cisco 2-Gbps Fibre Channel SFPs
The Cisco 2-Gbps Fibre Channel SFPs (Figure 1) are designed to provide cost-effective Fibre Channel connectivity
for the Cisco MDS 9000 Fibre Channel switching modules. There are two types of Cisco 2-Gbps Fibre Channel SFP:
the Cisco Fibre Channel Shortwave SFP (part number DS-SFP-FC-2G-SW) and the Cisco Fibre Channel Longwave
SFP (part number DS-SFP-FC-2G-LW). Each product offers 1/2-Gbps autosensing Fibre Channel connectivity.