Datasheet

Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 12 of 22
Figure 7. Cisco 10-Gbps Fibre Channel CX4 X2 Transceiver (Part Number DS-X2-FC10G-CX4)
Technical Specifications
Connectors and Cabling
Connectors
Dual SC connector (DS-X2-FC10G-SR, DS-X2-FC10G-LR, and DS-X2-FC10G-ER)
CX4 Connector (DS-X2-FC10G-CX4)
Table 21 summarizes the cabling specifications.
Table 21. X2 Port Cabling Specifications
X2 Wavelength
(nanometers)
Fiber Type Core Size (microns) Baud Rate (GBd) Cable Distance
62.5 10.51875 33 m (108 ft) DS-X2-FC10G-SR 850 MMF
50.0 (OM3) 10.51875 300 m (984 ft)
DS-X2-FC10G-LR 1310 SMF 9.0 10.51875 10 km (6.2 mi)
DS-X2-FC10G-ER 1550 SMF 9.0 10.51875 40 km (24.8 mi)
DS-X2-FC10G-CX4 Copper 10.51875 15 m (49.2 ft)
Note: The minimum cable distance for all listed transceivers (MMF and SMF) except CX4 is 6.5 feet (2 meters).
Dimensions
Dimensions (H x W x D): 19.2 x 41.8 x 90.8 mm
Environmental Conditions and Power Requirements
Table 22 presents the optical parameters, and Table 23 presents the temperature ranges.
Table 22. Optical Parameters
X2 Average Transmit Power (dBm) Average Receive Power (dBm) Fiber Loss Budget (dBm)
Max Min Max Min
DS-X2-FC10G-SR –1.2 –7.3 –1.0 –9.9 2.6 (50.0 microns [OM3])
DS-X2-FC10G-LR 0.5 –8.2 0.5 –14.4 6.2
DS-X2-FC10G-ER 4.0 –4.7 –1.0 –15.8 11.1
Note: DS-X2-FC10G-CX4 is not an optical module and is therefore not listed in this table.