Operation Manual

Back Panel Description
TP-00100 9
Back Panel Description
The following illustration identifies the back panel components on the Cisco
Wireless Gateway. Descriptions for each component follow the illustration.
Important: Do not connect your PC to both the Ethernet and USB ports (future
capability) at the same time.
Important: Use only the power cord provided with your Wireless Gateway.
CAUTION:
Avoid damage to your equipment. Only use the power cord that is provided
with your Wireless Gateway.
1 RESET—A momentary pressing (1-2 seconds) of this switch restarts the device.
To press this switch, insert a thin object, such as a paper clip, into the RESET
port; then press and hold the switch for more than 15 seconds to reset all settings
to their factory-settings and then restart the device.