Specifications

Control Access to the Internet
Cox Business Internet Gateway Admin Guide 43
Control Access to the Internet
{
XE "Control Access to the Internet" \t
"See"
}
This section provides procedures for configuring the options available on the Access
Restriction page.
Configure IP Address Filtering Settings
{
XE "Configure IP Address Filtering
Settings" \t "See"
}
Use the settings on this page to configure IP address filters. These filters prevent a range of IP
addresses from accessing the Internet.
Important: If you are not familiar with the advanced settings described in this section,
contact your IT department before you attempt to change any of the default advanced IP
filtering settings.
Figure 20. IP Address Filtering screen
Follow these instructions to configure IP Address Filtering settings.
1. From the Access Restrictions menu in the toolbar, click the IP Address Filtering
tab.
2. In the Start Address and End Address fields, enter the range of IP addresses that
you want to prevent from having access to your network. (Note: Check the Enable
box to allow access of the range of addresses you defined.)
3. After you make your selections, click the Save Settings button to apply your
changes or click the Cancel Changes button to withdraw.