Specifications

Configure Wireless Settings
Cox Business Internet Gateway Admin Guide 31
Configure WDS Settings
{
XE "Configure WDS Settings" \t "See"
}
The Wireless Distribution System (WDS) Settings page allows you to expand the coverage
of your wireless network by deploying signal repeaters.
Figure 15. WDS Settings screen
Section
Field Description
Wi-Fi Radio 1 WDS Settings
WDS MAC Address. Displays the WDS MAC Address (or
BSSID) of your gateway access point.
Allow Wireless Signal To Be Repeated by a Repeater. Select
this option to allow a wireless client to connect to a repeater and
route traffic between the wireless client and a repeater. A
maximum of three (3) repeaters is allowed.
Remote Access Point's MAC Address (MAC 1 through 3).
Use the three fields (MAC 1, 2, and 3) to enter the MAC address
of the repeaters.
Wi-Fi Radio 1 WDS Settings
WDS MAC Address. Displays the WDS MAC Address (or
BSSID) of your gateway access point.
Allow Wireless Signal To Be Repeated by a Repeater. Select
this option to allow a wireless client to connect to a repeater and
route traffic between the wireless client and a repeater. A
maximum of three (3) repeaters is allowed.
Remote Access Point's MAC Address (MAC 1 through 3).
Use the three fields (MAC 1, 2, and 3) to enter the MAC address
of the repeaters.