Specifications

Configure Wireless Settings
Cox Business Internet Gateway Admin Guide 19
Section
Field Description
and provides the best user experience.
Extended Channel. Select one of the extended channels from
the drop-down list to correspond with your network settings. All
devices in your wireless network must broadcast on the same
channel in order to communicate. You can select Auto (factory
default) for automatic channel selection. Note: “Auto” is the
preferred setting and provides the best user experience.
The following network information status is displayed:
Network Name (SSID). The name or service set identifier
(SSID) of your wireless access point
MAC Address (BSSID). The MAC Address of your gateway's
local wireless access point
SSID Broadcast. The status of the gateway's SSID Broadcast
feature.
Use the following steps to configure the wireless interface for the Wi-Fi Radio 1 and Radio 2
Networks.
1. From the Wireless menu in the toolbar, click the Radio Settings tab.
2. Use the information in the Field Description column in the table above to help you
populate the fields.
3. After you make your selections, click the Save Settings button to apply your
changes or click the Cancel Changes button to withdraw.