Specifications

Set Up Basics
Cox Business Internet Gateway Admin Guide 11
Configure Time Settings
The last section of the Quick Setup tab allows you to set up the correct time zone for the server
in your location.
Figure 7. Time Settings screen
Section
Field Description
Time Settings
Time Zone: Select the time zone for your location. If your
location follows daylight saving time, select Automatically
adjust clock for daylight saving time.
Provide input/verify descriptions for the following settings:
Daylight Saving time <X> minutes
Time Server: Enter the name of a server to be used as the
Daylight Saving Time (DST) server and click Add Server to add
the server.
Remove Server: To eliminate a server from the list of available
DST servers, select the server and click Remove Server.
NTP. Select Enable or Disable to indicate whether or not a
Network Time Protocol (NTP) server will be used.
Use the following steps to configure Time Settings.
1. Log in to the system and click the Setup menu in the toolbar and the LAN Setup
tab.
2. Use the information in the Field Description column in the table above to help you
populate the fields.
3. When you are done, click the Save Settings button to apply your changes or click
the Cancel Changes button to withdraw.