Specifications

Set Up Basics
8 Cox Business Internet Gateway Admin Guide
Configure LAN Setup
{
XE "Configure LAN Setup Settings" \t "See"
}
The LAN Setup page allows you to configure the settings for the Local Area Network (LAN).
These settings include the range of IP addresses that define the LAN itself, as well as how the
addresses are assigned (automatically by DHCP or manually) as new devices are added to the
network.
Configure Gateway IP
Important: Unless you are knowledgeable about administering IP addresses, we
recommend that you do not change these settings. If you change these values
incorrectly, you can lose Internet access.
Figure 5. Configure LAN Gateway IP screen
Section
Field Description
Network Setup (LAN) Gateway IP
Local IP Address. The base IP address of the private LAN. The
factory default LAN IP Address is 192.168.0.1
Subnet Mask. The subnet mask for your LAN.
Follow these instructions to apply settings to the Configure LAN Setup / Gateway IP:
1. The Setup LAN page appears whenever you log on to the gateway. However, if the
page does not display, click the LAN Setup tab and scroll to the Network Setup
(LAN) Gateway IP section.
2. Use the information in the Field Description column in the table above to help you
populate the fields.
3. After you make your selections, click the Save Settings button to apply your
changes or click the Cancel Changes button to withdraw.