Specifications

Contents
ix
Cisco ONS 15454 Installation and Operations Guide, R3.2
March 2002
Add a BLSR Node 5-19
Remove a BLSR Node 5-22
5.2.9 Moving BLSR Trunk Cards 5-24
Move a BLSR Trunk Card 5-25
5.3 Unidirectional Path Switched Rings 5-27
5.3.1 Example UPSR Application 5-29
5.3.2 Setting Up a UPSR 5-31
Install the UPSR Trunk Cards 5-31
Configure the UPSR DCC Terminations 5-32
Enable the UPSR Ports 5-33
5.3.3 Adding and Removing UPSR Nodes 5-33
Switch UPSR Traffic 5-33
Add a UPSR Node 5-35
Remove a UPSR Node 5-36
5.4 Subtending Rings 5-37
Subtend a UPSR from a BLSR 5-39
Subtend a BLSR from a UPSR 5-39
Subtend a BLSR from a BLSR 5-41
5.5 Linear ADM Configurations 5-42
Create a Linear ADM 5-43
Convert a Linear ADM to UPSR 5-43
Convert a Linear ADM to a BLSR 5-48
5.6 Path-Protected Mesh Networks 5-51
Circuits and Tunnels 6-1
6.1 Circuits Overview 6-1
6.2 Creating Circuits and VT Tunnels 6-2
Create an Automatically Routed Circuit 6-2
Create a Manually Routed Circuit 6-6
6.3 Creating Multiple Drops for Unidirectional Circuits 6-8
Create a Unidirectional Circuit with Multiple Drops 6-8
6.4 Creating Monitor Circuits 6-9
Create a Monitor Circuit 6-9
6.5 Searching for Circuits 6-10
Search for ONS 15454 Circuits 6-10
6.6 Editing UPSR Circuits 6-10
Edit a UPSR Circuit 6-11