Specifications

Contents
v
Cisco ONS 15454 Installation and Operations Guide, R3.2
March 2002
1.11.1 Twisted Pair Wire-Wrap Installation 1-39
Install DS-1 Cables Using Electrical Interface Adapters (Balun) 1-40
1.11.2 AMP Champ Connector Installation 1-41
Install DS-1 AMP Champ Cables on the AMP Champ EIA 1-43
1.12 Card Installation 1-44
1.12.1 Slot Requirements 1-45
Install the TCC+ and XC/XCVT/XC10G Cards 1-47
Install Optical, Electrical, and Ethernet Cards 1-48
Install the AIC Card 1-49
1.12.2 Gigabit Interface Converter 1-50
Install Gigabit Interface Converters 1-50
Remove a Gigabit Interface Converter 1-52
1.13 Fiber-Optic Cable Installation 1-52
Install Fiber-Optic Cables on OC-N Cards 1-53
Install the Fiber Boot 1-53
1.14 Cable Routing and Management 1-54
1.14.1 Optical Cable Management 1-55
Route Fiber-Optic Cables in the Shelf Assembly 1-56
1.14.2 Coaxial Cable Management 1-57
Route the Coaxial Cables 1-57
1.14.3 DS-1 Twisted-Pair Cable Management 1-58
Route DS-1 Twisted-Pair Cables 1-58
1.14.4 AMP Champ Cable Management 1-59
1.14.5 BIC Rear Cover Installation 1-59
Install the BIC Rear Cover 1-59
1.15 Ferrite Installation 1-61
Attach Ferrites to Power Cabling 1-61
Attach Ferrites to Wire-Wrap Pin Fields 1-63
1.16 ONS 15454 Assembly Specifications 1-64
1.16.1 Bandwidth 1-64
1.16.2 Slot Assignments 1-64
1.16.3 Cards 1-64
1.16.4 Configurations 1-65
1.16.5 Cisco Transport Controller 1-65
1.16.6 External LAN Interface 1-66
1.16.7 TL1 Craft Interface 1-66
1.16.8 Modem Interface 1-66