Specifications

Index
IN-12
Cisco ONS 15454 Installation and Operations Guide, R3.2
March 2002
setting up basic node information 3-2
setting up timing 3-14
tabs list 2-15
viewing popup information 2-15
NPJC-Pdet parameter
description
8-12
EC-1 card 8-17
OC-12, OC-48, OC-192 cards 8-43, 8-48
OC-3 card 8-38
provisioning 7-22
NPJC-Pgen parameter 8-12
EC-1 card 8-18
OC-12, OC-48, OC-192 cards 8-43, 8-48
OC-3 card 8-38
provisioning 7-22
O
OAM&P access 2-14
OC-N cards
BLSR trunk cards
5-11
connecting fiber 1-52
creating protection groups 3-9
data export 2-27
fiber protection 1-53
modifying transmission quality 7-18
moving BLSR trunk cards 5-25
path trace 6-12
performance monitoring for OC-12, OC-48 and
OC-192
8-41, 8-46
performance monitoring for OC-3 8-36
provisioning for SDH 7-23
provision line transmission settings 7-18
provision threshold settings 7-19
timing 3-12
UPSR trunk cards 5-31
online documentation 2-4
ONS 15327 9-14
Open Shortest Path First see OSPF
optical cables see fiber-optic cables
optical carrier cards see OC-N cards
optical transmission quality
7-18
orderwire 7-29 to 7-30
OSPF
connecting nodes to CTC
4-6
definition 4-10 to 4-13
routing table 4-5
P
passwords 2-10, 3-8
path-protected mesh network see PPMN
path trace
6-12 to 6-15
PDI-P 6-3, 6-7
performance monitoring 8-1 to 8-46
15-minute intervals 8-3
clear count displayed 8-7
clear count stored 8-8
DS1 and DS1N parameters 8-18
DS3-12E and DS3N-12E parameters 8-27
DS3 and DS3N parameters 8-24
DS3XM-6 parameters 8-31
EC-1 card 8-14
Ethernet 9-52
IPPM 8-10
line-level thresholds for electrical cards, setting 7-2
OC-12, OC-48, and OC-192 8-41, 8-46
OC3 parameters 8-36
path-level thresholds for electrical traffic, setting 7-2
path-level thresholds for STS/VT1.5 traffic, setting 7-2
thresholds 8-9
ping 4-2
plug-in units see cards
pointer justification counts
8-12
point-to-point
see Ethernet circuits
see linear ADM
popup data
2-15