Specifications

8-31
Cisco ONS 15454 Installation and Operations Guide, R3.2
March 2002
Chapter 8 Performance Monitoring
Performance Monitoring for Electrical Cards
8.5.5 DS3XM-6 Card Performance Monitoring Parameters
Figure 8-19 shows the signal types that support far-end PMs. Figure 8-20 shows where overhead bytes
detected on the ASICs produce performance monitoring parameters for the DS3XM-6 card.
Figure 8-19 Monitored signal types for the DS3XM-6 card
Note The XX in the illustration above represents all PMs listed below with the given prefix and/or suffix.
Figure 8-20 PM read points on the DS3XM-6 card
55312
ONS 15454
DS3XM OC48
Fiber
Near End
Muxed DS3 Signal
DS1 Path (DS1 XX) Far End PMs Not Supported
ONS 15454
DS3XMOC48
Far End
Muxed DS3 Signal
DS3 Path (DS3 XX) Far End PMs Supported
VT Path (XX-V) Far End PMs Supported
STS Path (STS XX-P) Far End PMs Not Supported
55307
ONS 15454
DS3XM-6 Card
LIU
Mapper Unit
BTC
ASIC
XC10G Card OC-N
DS1 Side
VT
Level
SONET Side
CV-V
ES-V
SES-V
UAS-V
DS1 AISS-P
DS1 ES-P
DS1 SAS-P
DS1 SES-P
DS1 UAS-P
DS3 CV-L
DS3 ES-L
DS3 SES-L
DS3 LOSS-L
DS3 AISS-P
DS3 CVP-P
DS3 ESP-P
DS3 SASP-P
DS3 SESP-P
DS3 UASP-P
DS3 CVCP-P
DS3 ESCP-P
DS3 SASCP-P
DS3 SESCP-P
DS3 UASCP-P
STS CV-P
STS ES-P
STS FC-P
STS SES-P
STS UAS-P
PMs read on Mapper Unit ASIC
The DS3 path is terminated on the
transmux and regenerated.
PMs read on LIU
Path
Level