Specifications

8-27
Cisco ONS 15454 Installation and Operations Guide, R3.2
March 2002
Chapter 8 Performance Monitoring
Performance Monitoring for Electrical Cards
8.5.4 DS3-12E and DS3N-12E Card Performance Monitoring Parameters
Figure 8-17 shows the signal types that support far-end PMs. Figure 8-18 shows where overhead bytes
detected on the ASICs produce performance monitoring parameters for the DS3-12E and DS3N-12E
cards.
Figure 8-17 Monitored signal types for the DS3-12E and DS3N-12E cards
Note The XX in the illustration above represents all PMs listed below with the given prefix and/or suffix.
Figure 8-18 PM read points on the DS3-12E and DS3N-12E cards
61156
ONS 15454
DS3E OC48
Fiber
Near End
DS3 Signal
DS3E Path Far End PMs Are Supported
ONS 15454
DS3EOC48
Far End
DS3 Signal
STS Path (STS XX-P) Far End PMs Not Supported
55306
ONS 15454
DS3-12E & DS3N-12E Cards
LIU
Mux/Demux ASIC
BTC
ASIC
XC10G Card OC-N
DS3 Side
Path
Level
SONET Side
STS CV-P
STS ES-P
STS FC-P
STS SES-P
STS UAS-P
DS3 CV-L
DS3 ES-L
DS3 SES-L
DS3 LOSS-L
DS3 AISS-P
DS3 CVP-P
DS3 ESP-P
DS3 SASP-P
DS3 SESP-P
DS3 UASP-P
DS3 CVCP-P
DS3 ESCP-P
DS3 SESCP-P
DS3 UASCP-P
DS3 CVCP-PFE
DS3 ESCP-PFE
DS3 SASCP-PFE
DS3 SESCP-PFE
DS3 UASCP-PFE
PMs read on Mux/Demux ASIC
PMs read on LIU