Specifications

8-11
Cisco ONS 15454 Installation and Operations Guide, R3.2
March 2002
Chapter 8 Performance Monitoring
Enabling Intermediate-Path Performance Monitoring
Step 2 Select the Provisioning > STS tabs.
Figure 8-8 STS tab for enabling IPPM
Step 3
Click Enable IPPM for the STS you want to monitor.
Note The far-end IPPM feature is not supported in Software R3.0, R3.1, or R3.2. However,
SONET path PMs can be monitored by logging into the far-end node directly.
Step 4 Click Apply.
Table 8-3 Traffic Cards that Terminate the Line, Called LTEs
Line Terminating Equipment
EC1-12 OC3 IR 4/STM1 SH 1310
OC12 IR/STM4 SH 1310 OC12 LR/STM4 LH 1310
OC12 LR/STM4 LH 1550 OC48 IR 1310
OC48 LR 1550 OC48 IR/STM16 SH AS 1310
OC48 LR/STM16 LH AS 1550 OC48 ELR/STM16 EH 100 GHz
OC48 ELR/STM16 EH 200 GHz OC192 LR/STM64 LH 1550
61946
STS tab Provisioning tab Card view