Specifications

7-22
Cisco ONS 15454 Installation and Operations Guide, R3.2
March 2002
Chapter 7 Card Provisioning
Provisioning Optical Cards
NPJC-Pdet
Negative Pointer Justification
Count, STS Path detected. See the
“Enabling Pointer Justification
Count Parameters” section on
page 8-12 for more information.
Numeric. Defaults (Near and Far End):
Line
• 0 (15 minutes)
• 0 (1 day)
PPJC-Pgen
Positive Pointer Justification
Count, STS Path generated. See
the “Enabling Pointer Justification
Count Parameters” section on
page 8-12 for more information.
Numeric. Defaults (15 min/1 day):
Line
• 0/0 (Near and Far End)
NPJC-Pgen
Negative Pointer Justification
Count, STS Path generated. See
the “Enabling Pointer Justification
Count Parameters” section on
page 8-12 for more information.
Numeric. Defaults (15 min/1 day):
Line
• 0/0 (Near and Far End)
PSC
Protection Switching Count (Line) Numeric. Defaults (15 min/1 day):
Line
• 1/5 (Near End)
• 0/0 (Far End)
PSD
Protection Switch Duration (Line) Numeric. Defaults (15 min/1 day):
Line
• 300/600 (Near End)
• 0/0 (all OC-N cards, Far End)
PSC-W
Protection Switching Count -
Working line
BLSR is not supported on the
OC-3 card; therefore, the PSC-W,
PSC-S, and PSC-R PMs do not
increment.
Numeric. Defaults (15 min/1 day):
Line
• 0/0 (all OC-N cards except OC-3, Near and
Far End)
PSD-W
Protection Switching Duration -
Working line
BLSR is not supported on the
OC-3 card; therefore, the PSD-W,
PSD-S, and PSD-R PMs do not
increment.
Numeric. Defaults (15 min/1 day):
Line
• 0/0 (all OC-N cards except OC-3, Near and
Far End)
PSC-S
Protection Switching Duration -
Span
BLSR is not supported on the
OC-3 card; therefore, the PSC-W,
PSC-S, and PSC-R PMs do not
increment.
Numeric. Defaults (15 min/1 day):
Line
• 0/0 (all OC-N cards except OC-3, Near and
Far End)
Table 7-8 OC-N Card Threshold Settings on the Provisioning > Thresholds Tab (continued)
Heading Description Options