Specifications

6-14
Cisco ONS 15454 Installation and Operations Guide, R3.2
March 2002
Chapter 6 Circuits and Tunnels
Creating a Path Trace
Figure 6-7 Selecting the Edit Path Trace option
Step 5
On the Circuit Path Trace window (Figure 6-8) in the New Transmit String field (this field is available
only on DS-1, DS3E, DS3XM-6, and G1000-4 cards), enter the string that you want the source port to
transmit. For example, you could enter the node IP address, node name, circuit name, or another string.
If the New Transmit String field is left blank, the J1 transmits an empty string.
Figure 6-8 Setting up a path trace
Step 6
Click Apply but do not close the window.
Step 7 Return to the Edit Circuit window (Figure 6-7).