Specifications

Figures
xxiii
Cisco ONS 15454 Installation and Operations Guide, R3.2
March 2002
Figure 9-36 MAC addresses recorded in the MAC table 9-49
Figure 9-37 Creating RMON thresholds 9-52
Figure 10-1 Viewing alarms in the CTC node view 10-2
Figure 10-2 Selecting the Affected Circuits option 10-4
Figure 10-3 A highlighted (selected) circuit 10-5
Figure 10-4 Viewing fault conditions retrieved under the Conditions tabs 10-6
Figure 10-5 Viewing all alarms reported for the current session 10-7
Figure 10-6 The LCD panel 10-8
Figure 10-7 Alarm profiles screen showing the default profiles of the listed alarms 10-9
Figure 10-8 Node view of a DS1 alarm profile 10-12
Figure 10-9 Card view of a DS1 alarm profile 10-12
Figure 10-10 The suppress alarms checkbox 10-14
Figure 11-1 A basic network managed by SNMP 11-2
Figure 11-2 An SNMP agent gathering data from an MIB and sending traps to the manager 11-2
Figure 11-3 Example of the primary SNMP components 11-3
Figure 11-4 Setting up SNMP 11-4
Figure 11-5 Viewing trap destinations 11-5
Figure A-1 Multiple protection domains A-1
Figure A-2 Secondary sources and drops A-3
Figure A-3 Alternate paths for virtual UPSR segments A-4
Figure A-4 Mixing 1+1 or BLSR protected links with a UPSR A-4
Figure A-5 Ethernet shared packet ring routing A-5
Figure A-6 Ethernet and UPSR A-5