Specifications

Figures
xxii
Cisco ONS 15454 Installation and Operations Guide, R3.2
March 2002
Figure 9-1 Data traffic using a G1000-4 point-to-point circuit 9-2
Figure 9-2 End-to-end Ethernet link integrity support 9-4
Figure 9-3 G1000-4 Gigabit EtherChannel (GEC) support 9-5
Figure 9-4 G1000-4 card faceplate LEDs 9-6
Figure 9-5 Provisioning G1000-4 Ethernet ports 9-8
Figure 9-6 A gigabit interface converter 9-9
Figure 9-7 Provisioning E-100 Series Ethernet ports 9-11
Figure 9-8 A Multicard EtherSwitch configuration 9-13
Figure 9-9 A Single-card EtherSwitch configuration 9-13
Figure 9-10 A Multicard EtherSwitch point-to-point circuit 9-15
Figure 9-11 A Single-card Etherswitch point-to-point circuit 9-16
Figure 9-12 Choosing a circuit source 9-17
Figure 9-13 A shared packet ring Ethernet circuit 9-18
Figure 9-14 Choosing a VLAN name and ID 9-20
Figure 9-15 Selecting VLANs 9-20
Figure 9-16 Adding a span 9-21
Figure 9-17 Viewing a span 9-22
Figure 9-18 A Hub and Spoke Ethernet circuit 9-23
Figure 9-19 Ethernet manual cross-connects 9-25
Figure 9-20 Creating an Ethernet circuit 9-26
Figure 9-21 Selecting VLANs 9-27
Figure 9-22 Creating an Ethernet circuit 9-28
Figure 9-23 Selecting VLANs 9-29
Figure 9-24 A G1000-4 point-to-point circuit 9-31
Figure 9-25 Creating a G1000-4 circuit 9-32
Figure 9-26 Circuit Creation dialog box 9-33
Figure 9-27 G1000-4 manual cross-connects 9-34
Figure 9-28 Circuit Creation (Circuit Source) dialog box 9-35
Figure 9-29 A Q-tag moving through a VLAN 9-37
Figure 9-30 The priority queuing process 9-38
Figure 9-31 Configuring VLAN membership for individual Ethernet ports 9-39
Figure 9-32 An STP blocked path 9-40
Figure 9-33 The spanning tree map on the circuit screen 9-42
Figure 9-34 G1000-4 Statistics window 9-43
Figure 9-35 The G1000-4 Maintenance tab, including loopback and bandwidth information 9-46