Specifications

3-11
Cisco ONS 15454 Installation and Operations Guide, R3.2
March 2002
Chapter 3 Node Setup
Creating Protection Groups
Step 4 Click Apply.
Procedure: Edit Protection Groups
Step 1 From the CTC node view, click the Provisioning > Protection tabs (Figure 3-7).
Figure 3-7 Editing protection groups
Step 2 In the Protection Groups section, choose a protection group.
Step 3 In the Selected Group section, edit the fields as appropriate. (For field descriptions, see the “Create
Protection Groups” procedure on page 3-9.)
Step 4 Click Apply.
Procedure: Delete Protection Groups
Step 1 From the CTC node view, click the Maintenance > Protection tabs.
Step 2 Verify that working traffic is not running on the protect card:
a. In the Protection Groups section, choose the group you want to delete.