Specifications

2-17
Cisco ONS 15454 Installation and Operations Guide, R3.2
March 2002
Chapter 2 Software Installation
Working with the CTC Window
2.6.2.2 Network View Tasks
Right-click the network view graphic area or a node, span, or domain (domains are described in the
“Creating Domains” section on page 2-18) to display shortcut menus. Table 2-7 lists the actions that are
available from the network view.
Table 2-6 Node Status
Color Alarm Status
Green No alarms
Yellow Minor alarms
Orange Major alarms
Red Critical alarms
Grey with node
name
Node is initializing
Grey with IP
address
Node is initializing or a problem exists with the IP routing from the node to CTC
Table 2-7 Performing Network Management Tasks in Network View
Action Procedure
Open a node Any of the following:
• Double-click a node icon
• Right-click a node icon and choose Open Node from the shortcut menu
• Click a node and choose Go to Selected Object View from the CTC View
menu
• From the View menu choose Go to Other Node. Select a node from the
Select Node dialog box
• Double-click a node alarm or event in the Alarms or History tabs
Move a node icon Press the Ctrl key and the left mouse button simultaneously and drag the node
icon to a new location.
Reset node icon
position
Right-click a node and choose Reset Node Position from the shortcut menu.
The node icon moves to the position defined by the longitude and latitude fields
on the Provisioning > General tabs in node view.
Provision a circuit Right-click a node. From the shortcut menu, choose Provision Circuit To and
select the node where you want to provision the circuit. For circuit creation
procedures, see the “Create an Automatically Routed Circuit” procedure on
page 6-2.
Update circuits with
new node
Right-click a node and choose Update Circuits With New Node from the
shortcut menu. Use this command when you add a new node and want to pass
circuits through it.
Display a link end
point
Right-click a span. On the shortcut menu, select Go To [node/slot/port] for the
drop port you want to view. CTC displays the card in card view.