Specifications

2-15
Cisco ONS 15454 Installation and Operations Guide, R3.2
March 2002
Chapter 2 Software Installation
Working with the CTC Window
2.6.1.2 Node View Card Shortcuts
If you move your mouse over cards in the graphic, tooltips display additional information about the card
including the card type, card status (active or standby), the number of critical, major, and minor alarms
(if any), and the alarm profile used by the card. Right-clicking a card reveals a shortcut menu, which you
can use to open, reset, or delete a card. Right-click a slot (grey) to pre-provision a card (i.e., provision a
slot before installing the card).
2.6.1.3 Node View Tabs
Use the node view tabs and subtabs, shown in Table 2-5, to provision and manage the ONS 15454.
Table 2-4 Node View Card Colors
Card Color Status
Grey Slot is not provisioned; no card is installed
Violet Slot is provisioned; no card is installed
White Slot is provisioned; a functioning card is installed
Yellow Slot is provisioned; a minor alarm condition exists
Orange Slot is provisioned; a major alarm condition exists
Red Slot is provisioned; a critical alarm exists
Table 2-5 Node View Tabs and Subtabs
Tab Description Subtabs
Alarms Lists current alarms (CR, MJ, MN) for the
node and updates them in real-time
none
Conditions Displays a list of standing conditions on the
node.
none
History Provides a history of node alarms including
date, type, and severity of each alarm. The
Session subtab displays alarms and events for
the current session. The Node subtab displays
alarms and events retrieved from a fixed-size
log on the node.
Session, Node
Circuits Create, delete, edit, and map circuits none
Provisioning Provision the ONS 15454 node General, Ether Bridge, Network,
Protection, Ring, Security, SNMP,
Sonet DCC, Timing, Alarming