Specifications

Contents

Cisco ONS 15454 Installation and Operations Guide, R3.2

March 2002

Convert DS3-12 Cards From 1:1 to 1:N Protection 7-33

Performance Monitoring 8-1

8.1 Using the Performance Monitoring Screen 8-2

8.1.1 Viewing PMs 8-2

View PMs 8-2

8.1.2 Changing the Screen Intervals 8-3

Select Fifteen-Minute PM Intervals on the Performance Monitoring Screen 8-3

Select Twenty-Four Hour PM Intervals on the Performance Monitoring Screen 8-4

8.1.3 Viewing Near End and Far End PMs 8-4

Select Near End PMs on the Performance Monitoring Screen 8-5

Select Far End PMs on the Performance Monitoring Screen 8-5

8.1.4 Using the Signal-Type Menu 8-6

Select Signal-Type Menus on the Performance Monitoring Screen 8-6

8.1.5 Using the Baseline Button 8-7

Use the Baseline Button on the Performance Monitoring Screen 8-7

8.1.6 Using the Clear Button 8-8

Use the Clear Button on the Performance Monitoring Screen 8-8

8.2 Changing Thresholds 8-9

8.3 Enabling Intermediate-Path Performance Monitoring 8-10

Enable Intermediate-Path Performance Monitoring 8-10

8.4 Enabling Pointer Justification Count Parameters 8-12

Enable Pointer Justification Count Performance Monitoring 8-13

8.5 Performance Monitoring for Electrical Cards 8-14

8.5.1 EC1 Card Performance Monitoring Parameters 8-14

8.5.2 DS1 and DS1N Card Performance Monitoring Parameters 8-18

8.5.3 DS3 and DS3N Card Performance Monitoring Parameters 8-24

8.5.4 DS3-12E and DS3N-12E Card Performance Monitoring Parameters 8-27

8.5.5 DS3XM-6 Card Performance Monitoring Parameters 8-31

8.6 Performance Monitoring for Optical Cards 8-36

8.6.1 OC-3 Card Performance Monitoring Parameters 8-36

8.6.2 OC-12 Card Performance Monitoring Parameters 8-41

8.6.3 OC-48 and OC-192 Card Performance Monitoring Parameters 8-46

Ethernet Operation 9-1

9.1 G1000-4 Card 9-1

9.1.1 G1000-4 Application 9-2

9.1.2 802.3x Flow Control and Frame Buffering 9-3